ICON Control Panels

The ICON-CP control panels were first introduced as a stylish and intuitive control panel for our Revolution series DSP processors. When connected to the Revolution processors via CAT5 cable, the ICON CP can be set to do a multitude of tasks. These can be; input or output mute or unmute, preset select, input or output level control with LED level indication, processor bypass or any combination of the above.

An impressive 240 x ICON-CP’s can be connected to one Revolution processor, with a maximum cable length of 1KM when utilising an external POE supply. You can also set up mimic panels easily, by duplicating dip switch settings. The ICON CP allows for untold control of the Revolution series DSP processor from an intuitive and simple set up control surface. All of this at a fraction of the cost of moving to a third party control system.



However, the ICON CP’s abilities do not stop there. With the simple flick of the rear panel dip switches, the ICON CP can be transformed into a cost effective and easy to use control surface for the Innovation series, IN600 AV room control system. Yes, now you can have remote control over Mic mute/unmute, mic master level, AV source select including level and projector on/off. And all of this from a well priced and easily integrated Control panel that has the aesthetics to look at home in any décor. Please note that 2x ICON CP’s are needed to access all IN600 front panel functions and that an external POE supply must be used.



The ICON CP will also be able to interface to the new AMD series of mixer amplifiers when they are released later this year – again adding control and flexibility in a stylish, intuitive control panel.



For more information please your local Hills SVL Branch and watch this space for more incredibly intuitive products from Australian Monitor that integrate with the ICON CP.

Hills SVL